Bending without cracking, impact without deformation! MESCO bimetallic composite panel, perfect replacement for stainless steel!
MESCO's independently developed and produced bimetallic
Composite panels use polymer material composite technology to tightly bond metal sheets of different materials (such as galvanized steel, stainless steel, copper, aluminum, titanium, etc.),
providing users with an efficient and economical material solution that can significantly reduce costs and improve performance.
The product tested this time is a 1.0mm galvanized plate+0.2mm stainless steel composite plate
Which reduces the cost by 30% compared to pure stainless steel plates of the same thickness.
This type of composite board is widely used in fields such as elevators, indoor and outdoor decoration, copper door industry, damping plates for new energy vehicles
and electronic control system casings.
The following is the bending test, which shows that there are no cracks and a smooth surface when bent close to 0 degrees.
Additionally, the composite board did not exhibit delamination during the bending process, demonstrating excellent overall performance.
Impact testing, far exceeding actual requirements in terms of shock resistance performance.
In the impact test, we used a 12 joule impact force to impact the edges of the composite plate, and the results showed that there were no cracks and the surface was intact after the first impact on the steel plate edges. After repeated impacts and 10 consecutive impacts on the same position, no cracking occurred, far exceeding the strength requirements in the actual processing process. Extreme testing showed that after 12 impacts, the composite panel still maintained structural integrity and exhibited extremely strong impact resistance!
This composite steel plate is significantly lower in cost than pure stainless steel plate
And combines the corrosion resistance of stainless steel with the strength of galvanized steel plate in performance.
It meets decorative requirements in surface effect and is suitable for various application scenarios.
MESCO bimetallic composite panels are becoming the mainstream choice to replace stainless steel due to their excellent performance
And economic benefits, helping users achieve cost reduction and efficiency improvement! MESCO has rich project experience
With a stock of 7000 tons in stock and a fastest delivery time of 3 days. Please send me an email to contact me as soon as possible!